CHESAPEAKE & OHIO H-8 ALLEGHENY 2-6-6-6 LOCOMOTIVE DRAWINGS

Reproductions of Original Chesapeake & Ohio Engineering Drawings

Available from http://www.livesteamlocomotives.com

CHESAPEAKE & OHIO Class: H-8 2-6-6-6

Rds. No’s. 1600 – 1659

SEE SEPARATE PAGE LISTINGS FOR C&O H-8 2-6-6-6 TENDER DRAWINGS and

BUCKEYE 6 & 8 WHEEL TENDER TRUCKS

See our C&O Railroad drawings page for ordering instructions.

Separate prices for all Chesapeake & Ohio 2-6-6-6 locomotive (steam engine) drawings total $363.50

Buy the full set for $308.97 and save 15%

All drawings are the property of Roger Goldmann and may not be copied, reproduced, sold, or redistributed for profit of any kind.

Prices are subject to change without notice.

Qty.	Price	C & O Number	Scale To 1 ft.	Dwg. Size (in.)	Drawing Title	Also used on:
	$308.97				Full set (all drawings listed below) – save $54.53
	21.00	42-11-71	1 ½”	30x130	Erecting Card – Elevation
	23.00	42-10-68	1 ½”	30x145	Erecting Card – Sections
	1.00	29-2-174	6”	12x17	Crank Pin – Front
	1.00	29-2-175	3”	18x11	Crank Pin – Intermediate
	1.00	29-2-176	3”	12x17	Crank Pin – Main
	2.00	#30-3-100	6”	22x17	Crosshead – Wrist Pin, Collar, Washer & Nut	J-3/ K-4/ T-1 NKP S-3
	2.00	30-3-130	3”	18x23	Crosshead
	2.00	39-3-153	6”	18x23	Eccentric Rod
	2.00	39-3-154	3”	24x18	Eccentric Crank
	8.00	40-11-138	3”	36x44	Engine Truck – Frame & Bottom Rocker Seat
	8.00	40-11-139	3”	34x45	Engine Truck Arrangement
	2.00	41-3-123	6”	18x22	Trailer Truck – Lateral Motion Device Arrangement – Front & Intermediate
	11.00	41-11-129	1 ½”	34x62	Trailing Truck – Frame
	9.00	42-10-62	1 ½”	30x59	Erecting Card – Backhead Arrangement
	15.00	46-11-222	1 ½”	34x91	Frame – Locomotive Bed – Front Engine
	19.00	46-11-223	1 ½”	34x110	Frame – Locomotive Bed – Back Engine
	2.00	47-3-328	1 ½”	24x17	Frame Details – Mallet Hinge Pin Arrangement
	4.00	47-7-337	2”	24x30	Frame Details – Boiler Bearing Assembly
	3.00	50-7-108	3”	30x23	Guides
	.50	#58-1-311	Not Scale	11x8	Link Motion – Reverse Yoke & Reach Rod Pin	C-16/ L-2,3/ K-4 F-18,19/ T-1 NKP S,S-1,2 PERE M. C-16 N,N-1,2
	.50	#58-1-362	6”	11x8	Link Motion – Reducing Bushing – Combination Lever	J-3/ L-2/ K-4
	.50	#58-1-367	6”	11x8	Link Motion – Pin – Connecting Rod & Radius Bar	J-3/ L-2/ K-4
	.50	#58-1-368	6”	12x4	Motion Work – Reverse Yoke & Gear Frame Pin	K-4
	.50	#58-1-374	6”	11x8	Link Motion – Reducing Bushing – Valve Rod	J-3/ L-2/ K-4
	.50	#58-1-375	6”	11x8	Link Motion – Reducing Bushing – Bell Crank	J-3/ L-2/ K-4
	.50	#58-1-376	6”	11x8	Link Motion – Washer – For Reverse Yoke	K-4
	.50	#58-1-377	6”	11x8	Valves – Distribution – Reducing Bushing – Connecting Rod	J-3/ L-2/ K-4
	1.00	58-2-285	4”	18x11	Link Motion – Gear Frame Drilling
	1.00	#58-2-312	6”	18x11	Link Motion – Reverse Yoke & Radius Bar Pin	C-16/K-4/J-3/L-2 N-1,2 NKP S-1,2,3
	1.00	#58-2-313	4”	18x11	Link Motion – Reverse Yoke & Radius Bar Pin	C-16, J-3/ L-2 N-1,2,3/ K-4 NKP S, S-1,2,3
	1.00	#58-2-370	6”	18x11	Link Motion – Bushings – Gear Frame	J-3/ L-2/ K-4
	1.00	58-2-380	3”	18x11	Link Motion – Gear Connecting Rod
	2.00	58-3-274	3”	22x17	Link Motion – Combination Lever
	2.00	58-3-275	3”	18x22	Link Motion – Gear Connecting Rod
	2.00	58-3-284	6”	18x23	Link Motion – Union Link & Pin
	2.00	58-3-328	4”	22x17	Link Motion – Valve Rod
	2.00	#58-3-361	4”	22x17	Link Motion – Radius Bar	J-3/ L-2/ K-4
	2.00	#58-3-363	3”	22x17	Link Motion – Bell Crank	J-3/ L-2/ K-4
	2.00	58-3-364	4”	18x21	Link Motion – Valve Rod
	3.00	58-4-279	3”	18x33	Link Motion – Gear Frame
	3.00	58-4-280	4”	18x33	Link Motion – Reverse Yoke
	3.00	#58-4-354	3”	34x17	Link Motion – Reverse Yoke	N-2/ L-2/ K-4 PERE M. N-2
	1.00	65-2-170	3”	12x17	Piston Rod
	2.00	65-3-169	Full	18x23	Piston
	4.00	65-7-171	Full	24x30	Piston & Cylinder Head Contour
	4.00	#72-5-351	4”	18x44	Rods – Main & Side – Front End Wedge Details – Main Rod	C-12,14,15 F-15,16,17,18 G-4,5,7,7B,7S,8,9 H-3,4,5,6,7 J-1,2,3/ K-1,2,3,4 B-1/ L-2/ T-1
	7.00	72-10-339	3”	24x59	Rods – Main & Side
	.50	#73-1-63	3”	12x8	Sandbox – Sandpipe Centering Device – Hanger	J-3 NKP S-2,3/ K-1
	.50	#73-1-68	6”	12x8	Sandbox – Sandpipe Centering Device – Roller	C-16/ J-3 NKP S,S-1,2,3/ K-1
	.50	#73-1-119	6”	12x8	Sandbox – Sandpipe Centering Device – Shoulder Bolt	J-3 NKP S,S-1,2,3/ K-1
	1.00	95-2-223	6”	18x11	Wheels – 36” Wrot Steel – Engine Truck
	1.00	#95-2-224	6”	18x11	Wheels – 36” Wrot Steel – Trailing Truck	J-3/ T-1 NKP S,S-12 PERE M. N,N-1,2
	2.00	#95-3-52	Full	22x17	Wheels – Tires – Driving (contour)	All classes
	2.00	#95-3-83	Full	22x17	Wheels – Tires – Trailing Truck (contour)	All classes
	2.00	95-3-225	3”	18x23	Wheels – Driving Wheel Center – Front
	2.00	95-3-226	3”	24x17	Wheels – Driving Wheel Center – Main
	2.00	95-3-227	3”	18x23	Wheels – Driving Wheel Center – Intermediate
	5.00	*GSC 52926	2”	24x41	Pilot
	15.00	GSC A-52955	1 ½”	34x90	Locomotive Bed – Front Unit
	13.00	GSC B-52955	2”	30x87	Locomotive Bed – Cylinder Portion – Front Unit
	19.00	GSC A-52956	1 ½”	34x110	Locomotive Bed – Rear Unit
	13.00	GSC B-52956	2”	34x87	Locomotive Bed – Cylinder Portion – Rear Unit
	9.00	GSC 55017	1 ½”	30x60	Cast Steel Six Wheel Trailer Truck Frame
	6.00	GSC 55034	3”	30x41	Cast Steel Outside Journal Two Wheel Engine Truck Frame
	4.00	**LLW 474-D-87	2”	24x30	Waist Bearer Assembly
	20.00	LLW 640-A-199	1 ½”	34x117	Piping – Right Side
	20.00	LLW 640-A-200	1 ½”	36x117	Piping – Left Side
	4.00	LLW 644-A-84	1 ½”	24x30	Feedwater Pump Steam & Exhaust Piping
	9.00	LLW 728-A-35	3”	30x60	Main & Side Rods
	10.00	LLW 779-B-5	1 ½”	30x66	Spring Rigging – Back Unit
	10.00	LLW 779-B-6	1 ½”	30x66	Spring Rigging – Front Unit
	1.00	LLW 952-H-146	Full	18x12	Wheels – Flanged Tires (contour)
	2.00	LLW 953-B-291	3”	18x24	Driving Wheel Center – Front
	2.00	LLW 953-B-292	3”	24x18	Driving Wheel Center – Main
	2.00	LLW 953-D-293	3”	18x24	Driving Wheel Center – Intermediate

*GSC – General Steel Castings Co.

# Used on more than one locomotive of the same railroad

**LLW – Lima Locomotive Works

Online: http://www.livesteamlocomotives.com

By mail: Roger Goldmann, 413 Morrison Lane, Dept. D-742, Santa Paula, CA 93060-1807

e-mail: drawings@livesteamlocomotives.com

Close window